Overshot Cards (all gauges)

Brand :

Write a Review
$18.98
SKU:
OSXX

Overshot Cards               (500/bag)

*Make sure to specify your gauge* 

Place an overshot card on top of the shot charge just before crimping to improve overall crimp quality and seal in small shot and/or buffer. Excellent for use with BPI Roll Crimpers.

    • Overshot cards produce flatter, tighter crimps
    • More consistent load combustion and pellet containment
    • Effectively contains pellets within the shotcup during the firing cycle
    • Added Water-repellant qualities
    • Seals buffer within the shell
    • Excellent for roll crimps
    • Overshot cards do NOT adversely affect patterns

Specifications: .030-.040" (thickness can vary +/- .005" due to material variation and humidity) Industry tolerances apply.

Our testing lab has proven that poor crimps can alter the performance of an otherwise good load. Overshot cards always produce better, more consistent crimps and this consistency is demonstrated in the standard deviation of loads in our lab. Our ballistic lab recommends overshot cards for better crimps in all loads. 

Clear Overshot Disks (either plain or printed with shot size) are also offered for great roll crimping options. See pictures in Additional Images or click on this link.

Shotshell size selection: Use the same size gauge as your hull. Smaller diameter cards also work if your particular size is out of stock. For example, a 20ga overshot card works in a 16-gauge shotshell and so on.  

Overshot Cards for Brass Hulls

Ga.      Bore Size    Wad Size       Notes

8ga     .835"             .850"  

9ga     .803"             .815" 10ga Thinwall Brass

10ga   .775"             .790" 12ga MagTech overshot card

11ga   .751"             .762" 12ga MagTech Brass

12ga   .729"             .740" 

13ga   .710"             .720" 16ga MagTech overshot card

14ga   .693"             .703" 16ga MagTech Brass

16ga   .662"             .672" 

17ga   .649"             .659" 20ga MagTech overshot card

19ga   .626"             .636" 

20ga   .615"             .625" 24ga MagTech Brass

24ga   .579"             .589" 28ga MagTech Brass

28ga   .550"             .560" 

32ga   .526"             .530" 

.410    .410"             .412" .410 is true bore size

.450    .450"            .450"