New! Spin-N-Trim Hull Trimmer 12ga
The tool that quickly & easily trims empty hulls.
New Arrival: Our lab spent over a year in the design of this case trimmer. We've seen many different versions over the years, but we can confidently say that ours is the best.
We've simplified the action and designed this trimmer so that a spring does all the hard work of applying force between the blade and the hull. Easily hold the Spin-N-Trim in one hand while you spin the hull with the other hand. It's really that easy.
Three-Second Instructions:
-
The maximum cut depth is 1/2-inch. Adjust the stop nut and cut-depth bolt to your desired cut depth if you desire less than a 1/2-inch cut.
-
Release blade pressure and insert empty hull over the tube bushing.
-
Allow the blade arm to apply pressure, grasp the hull by the base and rotate the Spin-N-Trim around the hull.
That's all there is to it. A quick and easy adjustable trim of the hull is completed with just a quick spin.
The Curmudgeon says, if you trim hulls, then this is your tool.
