TPS .410 non-toxic shot wad preslit (200/bag)
The world's first and only non-toxic .410 wad
Click here for SpheroTungsten .410 load data
The TPS .410 is a full-length shot column wad designed specifically for the rigors of modern non-toxic shot, like steel, ITX, and SpheroTungsten super shot. This is the only wad that will allow you to load almost any type of non-toxic shot for your modern .410 shotgun. Designed for magnum field loads, the TPS .410 is the grand result of over two years of development.
Maximum capacities of smaller shot sizes are 9/16 oz. ITX Extreme-13 shot, 1/2 oz. ITX Original-10 shot, and 3/8 oz. steel shot. Capacity will vary greatly according to pellet size and these maximum weights will not necessarily yield the best loads; only testing results will render that decision.
- Length = 1.972"
- Depth = 1.828"
- Gas seal diam. = 0.402"
- Gas seal depth = 0.057"
- Wall thick. = 0.025" to 0.050"
- Slits = Four slits
Product Type: Wad, Multi-Metal capability.
Size: .410 bore
Load data: Status of Steel and Small Bore Manual
Typical Loads: .410 non-toxic and high-capacity field loads.
Maximum Payload: 9/16 oz. ITX E-13 shot, 1/2 oz. ITX Original-10 shot, and 3/8 oz. steel shot.
Made in USA
NOTE: No wad can completely eliminate the risk of scoring or abrasion. Pellet materials harder than your gun's barrel can still cause damage. However, the TPS .410 wad is molded in tough high density material and will provide maximum protection.
Capacity chart (shot level with top of wad):
| TPS410 | shot size | grains | ounce |
| Steel | #7 | 157.2 | 3/8 |
| Steel | #6 | 155.7 | 3/8 |
| Steel | #5 | 147.3 | 5/16 |
| Steel | #4 | 147.8 | 5/16 |
| ITX-10 | #6 | 172.2 | 3/8 |
| ITX-10 | #4 | 167.2 | 3/8 |
| ITX-10 | #2 | 161.2 | 3/8 |
