Cheddite .410 3" hulls - 16 mm

Cheddite .410 3" new primed hull (bag/100) 

These are true .410 hulls according to SAAMI specifications. The maximum body diameter, which is slightly wider than CIP European standards, They are stamped .410 on the head.

• 16mm high brass
• Skived tube (taped material at the top of the hull)
• Cheddite 209 Primer
• Headstamp: "Cal. 36"
• Mfg by Cheddite

If cartridge manufacturers do not produce their own hulls, it is highly likely that they are using Cheddite hulls. These are reliable straight-wall hulls; extremely versatile for almost all load types. They crimp easily, either with a fold or roll. Primed with the reliable CX2000 (known as the Cheddite-209 in the USA).

A Super Crown Crimp Starter will make your crimping easier with much more satisfying results. Improved crimps and more complete powder ignition will result.

Remember, new/primed hulls are your best value and there's never a Hazmat charge when you ship them via ground service in the contiguous U.S.

Load data: See our Small Bore Manual both for lead & nontoxic loads, including buckshot loads for some .410 handguns.